HOT ! Automation Kit Automation For Ceiling Up-and-over Garage Door 70kg Clear 3

Intensive useQUICK ASSEMBLY SYSTEMProfessional+ OBSTACLE DETECTOR+ OPTICAL ENCODERUNIKO model 100kgFrom the top of technologyUNIKO is an electromechanical ceiling actuator with a modern design,for spring or sectional doors.Available in two models:For residential use (UNIKO 60).For condominium use (UNIKO 100).This product concentrates a high technological value which gives the product numerous qualities:Compact dimensions (360 x 200 x 120 mm).Installation times reduced by 40%.Base in sturdy plastic material which reduces the weight of the operator and makes it more manageable.Prepared for the use of low consumption lamps.UNIKO 70KG UNIKO 100KGMOTOR POWER SUPPLY 24 Vdc24 VdcMAX THRUST 700 N 1000 NMAX CAPACITY DIMENSION 10 MQ14 MQENGINE RPM 200 RPM 200 RPM ENCODERAVERAGE ABSORPTION 0.7 TO 1.2 APINION1/2 X1/8 Z9 PITCH 8 Z121/2 X1/8 Z9 PITCH 8 Z12NOISE LEVEL < 30 DBA < 30 DBAOPERATING TEMPERATURE -20/55°C -20/55°CPROTECTION DEGREE IP30IP30PATENTED THREE-STEP ASSEMBLY:UNIKO can be assembled in three steps on the appropriate track without the use of tools.1-Mount the support plate on the track by screwing the two bolts and fixing the lower part.2-Take the operator, engage the shaft and rotate.3-Insert the plug.To disassemble it, all you need is a screwdriver to pop the plug out.

CLICK ON THE LINK FOR THE PDF MANUAL:

MANUFACTURER\'S MECHANICAL PART MANUAL

MANUFACTURER\'S ELECTRONICS MANUAL

KIT COMPOSITION:n° 1 24V low voltage gearmotor kit, max capacity 100kg, built-in limit switch.n° 1 control unit positioned in the engine crankcase, with motor force adjustment trimmer and ENCODER, slowing down on opening and closing, 4 operating logics: step-by-step, semi-automatic 1 and 2, condominium automatic. Courtesy light, protection against overvoltages, input for photocells, safety edges and buffer battery.n° 1 Single-channel radio receiver incorporated in the control unit (433.9 MHz) n° 1 Antenna incorporated into the control unit, range 30 meters (433.9 MHz) n° 1 4-channel ROLLING CODE remote controln° 1 treated aluminum sliding guide with 3m chainn° 1 Internal emergency releasen° 1 Courtesy lightn° 1 Set of screws and brackets for mountingn° 1 Assembly instructions for the mechanical and electronic parts in ITALIAN