HOT ! Child Height Wooden Bench with Back - 36\" Long

The bench was originally designed for schools, but is a perfect fit for our Large Simple Rectangle Table 28\" x 42\" (with the child height legs) and can be tucked under the table between the legs. Made with Camden Rose\'s signature super-soft, rounded-over edges, creating a gentle look and feel.

Our Child Height Every Day Bench with Back has soft curves and a clean \'simple\' design that is timeless. Looks great accessorizing any play space. Finished with our Three BEEautiful Bees All Natural Beeswax Polish or a matte water-based hard finish that will maintain its beauty and with virtually no care needed. Just wipe with a damp cloth to clean.

Tung Oil finish is available upon request, for an additional cost.

• Bench Dimensions: 36\" L x 14\" W x 24\" H
  
  
  
  • The seat is 14\" above the ground and the distance from the seat to the top of the bench back is 10\" tall. 
  
  
  
  


• Simple assembly required, tool included and hardware included.


• Material: Cherry Hardwood with Maple Accents (legs)
  
  
  
  • Cherry wood is a beautiful, living wood that darkens with light exposure, and transforms into a deep brown red over time.
  
  
  
  


• Finish:
  
  
  
  • Hard Water-Based Finish
  
  
  • 
    Three BEEautiful Bees All Natural Beeswax Polish
    
    
    
    • A light finish made from organic jojoba oil and local beeswax. Periodic reconditioning may be needed to keep the wood looking new depending on use and household dryness.
    
    
    
    
  
  
  
  


• Made In USA
  

• Locate the bench top, 4 legs, 4 hex bolts, and the Allen wrench.


• Lay the bench face down on a flat surface.


• Insert a hex bolt through the countersunk (larger) hole in one bench leg and align the leg with the corner slot on the bench.


• Use the Allen wrench to tighten the bolt until the leg is firm against the bench. Do not tighten all the way until the last step.


• Repeat the above steps for the remaining three legs.


• Finish the bench by tightening all four bolts that secure the legs, in even increments to the bench with the Allen wrench.